Exam: 350-601
|
|||||||||||||||||||||||||||
Duration: 120 minutes
Languages: English
Exam overview
This exam tests your knowledge of implementing core data center
technologies, including:
Network
Compute
Storage network
Automation
Security
Exam preparation
Prepare for your certification exam with official Cisco training or study on
your own with self-study resources found on the Cisco Learning Network.
Official Cisco training
Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
Self-study resources
DCCOR training videos
DCCOR study materials
Exam Description:
Implementing Cisco Data Center Core Technologies v1.1 (DCCOR 350-601) is a
120-minute exam associated with the CCNP and CCIE Data Center Certifications.
This exam certifies a candidate's knowledge of implementing core data center
technologies including network, compute, storage network, automation, and
security. The course, Implementing Cisco Data Center Core Technologies, helps
candidates to prepare for this exam.
The following topics are general guidelines for the content likely to be
included on the exam. However, other related topics may also appear on any
specific delivery of the exam. To better reflect the contents of the exam and
for clarity purposes, the guidelines below may change at any time without
notice.
25% 1.0 Network
1.1 Apply routing protocols
1.1.a OSPFv2 and OSPFv3
1.1.b MP-BGP
1.1.c PIM
1.1.d FHRP
1.2 Apply switching protocols such as RSTP+, LACP and vPC
1.3 Apply overlay protocols such as VXLAN EVPN
1.4 Apply ACI concepts
1.4.a Fabric setup
1.4.b Access policies
1.4.c VMM
1.5 Analyze packet flow (unicast, multicast, and broadcast)
1.6 Describe Cloud service and deployment models (NIST 800-145)
1.7 Describe software updates and their impacts
1.7.a Disruptive / nondisruptive
1.7.b EPLD
1.7.c Patches
1.8 Implement network configuration management
1.9 Implement infrastructure monitoring such as NetFlow and SPAN
1.10 Explain network assurance concepts such as streaming telemetry
1.11 Describe the capabilities and features of Nexus Dashboard
25% 2.0 Compute
2.1 Implement Cisco Unified Compute System Rack Servers
2.2 Implement Cisco Unified Compute System Blade Chassis
2.2.a Initial setup
2.2.b Infrastructure management
2.2.c Network management (VLANs, pools and policies, templates, QoS)
2.2.d Storage management (SAN connectivity, Fibre Channel zoning, VSANs, WWN
pools, SAN policies, templates)
2.2.e Server management (Server pools and boot policies)
2.3 Explain HyperFlex Infrastructure Concepts and benefits (Edge and Hybrid
Architecture vs all-flash)
2.4 Describe firmware and software updates and their impacts on B-Series and
C-Series servers
2.5 Implement compute configuration management (Backup and restore)
2.6 Implement infrastructure monitoring such as SPAN and Cisco Intersight
20% 3.0 Storage Network
3.1 Implement Fibre Channel
3.1.a Switch fabric initialization
3.1.b Port channels
3.1.c FCID
3.1.d CFS
3.1.e Zoning
3.1.f FCNS
3.1.g Device alias
3.1.h NPV and NPIV
3.1.i VSAN
3.2 Implement FCoE Unified Fabric
3.3 Describe NFS and NAS concepts
3.4 Describe software updates and their impacts (Disruptive/nondisruptive and
EPLD)
3.5 Implement infrastructure monitoring
15% 4.0 Automation
4.1 Implement automation and scripting tools
4.1.a EEM
4.1.b Scheduler
4.1.c Bash Shell and Guest Shell for NX-OS
4.1.d REST API (NX-API, JSON and XML encodings)
4.1.e On-box Python
4.2 Evaluate automation and orchestration technologies
4.2.a Ansible
4.2.b Python
4.2.c POAP
4.2.d Cisco Nexus Dashboard Fabric Controller
4.2.e PowerShell
4.2.f Terraform
15% 5.0 Security
5.1 Apply network security
5.1.a AAA and RBAC
5.1.b ACI contracts and microsegmentation
5.1.c First-hop security features
5.1.d Keychain authentication
5.2 Apply compute security
5.2.a AAA and RBAC
5.3 Apply storage security
5.3.a AAA and RBAC
5.3.b Port security
5.3.c Fabric binding
350-601 Brain Dumps Exam + Online / Offline and Android Testing Engine & 4500+ other exams included
$50 - $25 (you save $25)
Buy Now
Sample Question:
QUESTION 1
An engineer is implementing OTV on a transport that supports multicast. The
solution needs to meet the following requirements:
Establish adjacency to the remote peer by using multicast.
Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose
two.)
A. otv site-vlan 100
B. otv data-group 232.2.2.0
C. otv use-adjacency-server 172.27.255.94
D. otv extend-vlan 100
E. otv control-group 232.1.1.1
Answer: DE
QUESTION 2
An engineer updated firmware on Fabric Interconnects and activates it.
However, the endpoint fails to boot from the new firmware image. What is
expected to occur in this case?
A. The system defaults to the backup image version
B. The system defaults to and boots into GOLD firmware image
C. The system defaults to the GOLD firmware image
D. The system defaults to and boots into kickstart image
Answer: A
QUESTION 3
Which configuration statically assigns VSAN membership to a virtual Fibre
Channel interface?
A. switch(config-vsan-cb># vsan 100 bind interface fc 3
B. switch<config-vsan-db)# vsan 100 bind interface vfc 31
C. switch(config-vsan-db># vsan 100 fc 3
D. switch(config-vsan-db)# vsan 100 interface vfc 31
Answer: D
QUESTION 4
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches.
The IP subnet of the
Eth 1 interface for both switches must be advertised via OSPF. However, these
interfaces must not
establish OSPF adjacency or send routing updates. The current OSPF adjacency
over the interface
Eth1 on SW1 and Eth1 on SW2 must remain unaffected. Which configuration must be
applied to
both Nexus switches to meet these requirements?
A. interface ethernet 1
passive-interface default
B. Interface ethernet 1
Ip ospf network point-to-point
C. interface ethernet 1
ip ospf passive-interface
D. interface ethernet 1
no ip ospf passive-Interface
Answer: C
QUESTION 6
An engineer needs to perform a backup of user roles and locales from Cisco
UCS Manager to
replicate the setting to a different fabric interconnect. The engineer wants to
review the file before
importing it to a target fabric interconnect. Which backup type must be selected
to meet these requirements?
A. all configuration
B. system configuration
C. logical configuration
D. full state
Answer: B
QUESTION 7
An engineer must configure HTTPS secure management for Cisco UCS Manager
using a key ring
named kr2016 and a key size of 1024 bits. The environment consists of a primary
fabric interconnect
named UCS-A and a secondary fabric interconnect named UCS-B. Which command
sequence must
be used to accomplish this goal?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
QUESTION 8
Which server policy is used to install new Cisco IMC software on a server?
A. host firmware policy
B. hypervisor firmware policy
C. BIOS software policy
D. Cisco IMC software policy
Answer: A
QUESTION 9
A network engineer must perform a backup and restore of the Cisco Nexus 5000
Series Switch
configuration. The backup must be made to an external backup server. The only
protocol permitted
between the Cisco Nexus switch and the backup server is UDP. The backup must be
used when the
current working configuration of the switch gets corrupted. Which set of steps
must be taken to meet
these requirements?
A. 1 Perform a startup-config backup to an FTP server.
2 Copy startup-config in the boot flash to the running-config file
B. 1 Perform a running-config backup to an SFTP server
2 Copy backup-config from the SFTP server to the running-config file
C. 1 Perform a running-config backup to an SCP server
2 Copy running-config in the boot flash to the running-config file
D. 1 Perform a startup-config backup to a TFTP server
2 Copy backup-config from the backup server to the running-config file
Answer: D
Explanation:
TFTP is the only protocol that uses UDP. FTP, SFTP, and SCP use TCP.
QUESTION 11
A customer wants to offload some of its order processing to a public cloud
environment.
The customer environment is based on Cisco ACI and uses Puppet with containenzed
applications.
The operations team requires a solution to orchestrate and optimize the cost of
the new solution.
Which product must be used to meet these requirements?
A. Cisco Intersight
B. Cisco Workload Optimization Manager
C. Cisco CloudCenter
D. Cisco Data Center Network Manager
Answer: C
Buy Complete
Students Feedback / Reviews/ Discussion
Bandile Ndlela Voted 2 weeks ago
Hello, with the new version released at 20th september, if this update all
questions?
upvoted 32 times
AGUIDI MAHAMAT Highly 4 months ago - Chad
95% of the questions are valid. Review the answers. Review discussions of why
some answers are inaccurate. This will provide better study and understanding of
content.
upvoted 32 times
Mahendrie Dwarika Most Recent 1 week - South Africa
More than 90% of the question on the exam were from here. Thxs Exam Topics
upvoted 5 times
valisetti ravishankar 3 weeks, 2 days ago - USA
Thank you so much for providing excellent study material. I prepared for my
350-501 exam and aced the exam with 950 marks
upvoted 7 times
Dos Santos Daniel 1 month, 1 week ago - Brazil
Passed My Exam on 19th , 91 multiple choice question , 5 new question and 86
question in here.
upvoted 23 times
logged members Can Post comments / review and take part in Discussion
Certkingdom Offline Testing Engine Simulator Download
Prepare with yourself how CertKingdom Offline Exam Simulator it is designed specifically for any exam preparation. It allows you to create, edit, and take practice tests in an environment very similar to an actual exam.
Supported Platforms: Windows-7 64bit or later - EULA | How to Install?
FAQ's: Windows-8 / Windows 10 if you face any issue kinldy uninstall and reinstall the Simulator again.
Download Offline Simulator-Beta
Certkingdom Testing Engine Features
- Certkingdom Testing Engine simulates the real exam environment.
- Interactive Testing Engine Included
- Live Web App Testing Engine
- Offline Downloadable Desktop App Testing Engine
- Testing Engine App for Android
- Testing Engine App for iPhone
- Testing Engine App for iPad
- Working with the Certkingdom Testing Engine is just like taking the real tests, except we also give you the correct answers.
- More importantly, we also give you detailed explanations to ensure you fully understand how and why the answers are correct.
Certkingdom Android Testing Engine Simulator Download
Take your learning mobile android device with all the features as desktop offline testing engine. All android devices are supported.
Supported Platforms: All Android OS EULA
Install the Android Testing Engine from google play store and download the app.ck from certkingdom website android testing engine download
Certkingdom Android Testing Engine Features
- CertKingdom Offline Android Testing Engine
- Make sure to enable Root check in Playstore
- Live Realistic practice tests
- Live Virtual test environment
- Live Practice test environment
- Mark unanswered Q&A
- Free Updates
- Save your tests results
- Re-examine the unanswered Q & A
- Make your own test scenario (settings)
- Just like the real tests: multiple choice questions
- Updated regularly, always current
